Siemens SCALANCE X-300

Connecting ground
4
3
2
1
① Grounding terminal with cable
② Washer
③ Spring washer
④ Nut
Follow the steps below to connect ground:
1. Put the parts ①, ② and ③ together on the grounding bolt as shown in the drawing.
2. Tighten the nut ④ with a maximum tightening torque of 1.5 Nm.
Connecting
6.5 Grounding
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 127