Siemens SCALANCE X-300 - X-300 FDA and IEC Approvals; Overview of the X-300 Approvals

SCALANCE X-300 declaration of conformity (https://
support.industry.siemens.com/cs/ww/en/ps/15296/cert)
1. Click on the entry "SCALANCE X-300 managed" in the navigation panel at the top edge of
the window and from the drop-down list that opens, select the entry for your product group.
2. Select the entry "Certificate" from the "Entry type"drop-down list.
Result: A list of the available certificates is displayed.
11.1.1.3 X-300 FDA and IEC approvals
The following devices meet the FDA and IEC requirements listed below:
Type Fulfills FDA and IEC requirements
X304-2FE CLASS 1 LED Product
X306-1LD FE CLASS 1 LASER Product
X307-3 CLASS 1 LASER Product
X307-3LD CLASS 1 LASER Product
X308-2 CLASS 1 LASER Product
X308-2LD CLASS 1 LASER Product
X308-2LH CLASS 1 LASER Product
X308-2LH+ CLASS 1 LASER Product
X310 -
X310FE -
X320-1FE CLASS 1 LED Product
X320-3LD FE CLASS 1 LASER Product
&RPSOLHVZLWK&)5
DQG
&/$66/$6(5352'8&7
)'$
,(&
Figure 11-1 FDA and IEC approvals
11.1.1.4 Overview of the X-300 approvals
Table 11-1 Overview of the approvals
Type c‑UL‑us c‑UL‑us
for hazardous
locations
1
FM
1
C‑TICK CE ATEX95
Zone 2
1
E1
X304-2FE ● ● ● ● ● ● -
X306-1LD FE ● ● ● ● ● ● -
X307-3 ● ● ● ● ● ● -
X307-3LD ● ● ● ● ● ● -
Certifications and approvals
11.1 X-300 product group
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 255