Siemens SCALANCE X-300 - Page 300

FDA and IEC marking
The following devices meet the FDA and IEC requirements listed below:
Pluggable transceiver CLASS 1 LASER PRODUCT
SFP ●
SFP+ ●
SCP ●
STP ●
&RPSOLHVZLWK&)5
DQG
&/$66/$6(5352'8&7
)'$
,(&
Figure 11-4 FDA and IEC approvals
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Mechanical stability (in operation)
Pluggable transceiver IEC 60068-2-6 vibration IEC 60068-2-27 shock
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
15 g, 11 ms duration
6 shocks per axis
SFP ● ●
SFP+ ● ●
SCP ● ●
STP ● ●
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (https://
support.industry.siemens.com/cs/ww/en/view/84922825)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (https://
support.industry.siemens.com/cs/ww/en/view/27069465)
● "EMC Installation Guidelines" configuration manual (https://support.industry.siemens.com/
cs/ww/en/view/60612658)
Certifications and approvals
11.9 Product group SFP
SCALANCE X-300
300 Operating Instructions, 11/2019, A5E01113043-24