Security features
8.1 Password protection
88
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
As soon as the password has been entered in the device once, it is not requested again as
long as the "Settings" menu level remains active.
Password policy: four-digit number from 0000 to 9999 (default password: 0000)
If no user-specific password has been assigned, the default password must be entered when
password protection is switched on.
The currently valid password becomes visible on the display when password protection is
switched off. The password remains saved and becomes effective again the next time
password protection is switched on.
Note
Before you switch on password protection, make sure that you and the group of authorized
users are all in possession of the password. If pass
word protection is switched on, the
password is mandatory for all changes to the device settings. You also require the password
to call the "PASSWORD" dialog box again in order to switch off access protection or to
change the password.
forgotten the password, please contact Technical Support (Page 8). You will be
issued with a new password.
To Next Page
Loading...
