Need help?Do you have a question about the Siemens SENTRON PAC2200 and is the answer not in the manual?
General| Communication Interface | Modbus RTU (optional) |
|---|---|
| Mounting | DIN rail |
| Protection Class | IP40 (front), IP20 (terminals) |
| Measurement Category | CAT III |
| Rated Current | 5 A |
| Accuracy Reactive Energy | Class 2 |
| Power Consumption Voltage Circuit | < 2 VA per phase |
| Power Consumption Current Circuit | < 0.1 VA per phase |
| Measurement Type | Power, Energy, Voltage, Current, Frequency, Power Factor |
| Display | LCD |
| Current Measurement Range | 1 A to 5 A |
| Frequency Measurement Range | 45 Hz - 65 Hz |
| Operating Temperature | -10 °C - +55 °C |
| Accuracy Class | 0.5S |
| Accuracy Active Energy | Class 0.5S |
| Storage Temperature | -25°C to +70°C |
| Rated Voltage | 230/400V AC |
| Dimensions | 96 x 96 x 70 mm |
Overview of the PAC2200's key capabilities and functionalities.
Explains how the device measures electrical voltage and current.
Describes the functions and configuration of digital inputs and outputs.
Outlines available communication interfaces like Ethernet, RS485, and M-BUS.
Critical safety precautions and warnings before making electrical connections.
Description of the device's display, buttons, and indicators.
Explains the device's menu structure and navigation levels.
Steps and requirements for initial device setup and startup.
Procedures for supplying power and configuring device settings.
Guidance for resolving faults and information on warranty terms.
Comprehensive technical specifications for the PAC2200 measuring device.
To Next Page