Siemens SENTRON PAC2200 - Technical Data and Specifications; Device Specifications and Measurement Details

PAC2200
Manual, 05/2018, L1V30415167B-02
75
Technical data
8
8.1
Technical data
Device configuration
● 1 optically isolated digital input
● 1 optically isolated digital output
● 1 Ethernet interface, for connecting and configuring to the PC or network (optional)
● 1 M-Bus connection for reading out the measured values (optional)
● 1 RS485 port for readout and configuration (optional)
Measurement
Only for connection to AC voltage systems
Measuring method
For voltage measurement True root-mean-square measurement (TRMS)
For current measurement True root-mean-square measurement (TRMS)
Measured value acquisition
Energy Contiguous (zero blind measuring)
Current, voltage Contiguous (zero blind measuring)
Waveform
Sinusoidal or distorted
Frequency of the relative fundamental
50 / 60 Hz (MID devices only 50 Hz)
Measured value acquisition mode
Automatic mains frequency acquisition