Siemens SENTRON PAC2200 - Main Menu Level; Setting Level; Editing Level

Operation
5.2 Menu navigation
PAC2200
52 Manual, 05/2018, L1V30415167B-02
5.2.2
Main menu level
In this menu level, all available measured variables are listed without measured values.
Additionally, the main menu level has a
"SETTINGS"
menu option for configuration of the device.
The
key returns the device to the measured value menu level.
Using the keys
and you can scroll through the measured variables.
The
key confirms the required selection and takes the device to the measured value
level.
In the "SETTINGS" menu option, the device is set to the "Setting level" by actuating the
key.
5.2.3
Setting level
At the setting level the device can be configured. At this menu level all settable parameters
are listed.
The
key returns the device to the "Main menu level".
Using the keys
and you can scroll through the setting parameters.
The
key confirms the required selection and takes the device to the editing level.
5.2.4
Editing level
At the editing level it is possible to modify the device parameters.
The
key returns the device to the setting level.
The required value can be adjusted using the
key.
The required value is entered using the
and keys.
The input is confirmed with the
key.
Each input must be confirmed with the
key, otherwise the change that has been made is
not accepted by the device.