Setting the IP address of the ChemWeb Server
16
Select the “Modem” you have just
installed and select “Properties“. In
the selection menu, the maximum
port speed must be set to 57600
bits/s. Confirm by clicking “OK”.
Leave the “Phone and Modem
Options” by clicking “OK”.
Establishing a connection in null modem operation
As an example, the setup of a null modem connection using a Windows XP system is shown
below. With other Windows versions, the procedure is similar (possibly the remote data
transmission network must be reinstalled). See your IT Department if needed. The null modem
driver must have already been installed correctly. To set up the connection, the menu item “Create
a new connection” in the left window under “Control Panel” ==> “Network and Internet
Connections” ==> “Network Connections” must be selected.
Select the menu item “Create new
connection” from the left window
to start the “New Connection
Wizard”.
Click “Next”.
To Next Page
Loading...
Need help?
General