Siemens SICAM Q100 - Page 44

Communication
2.2 Modbus
44 SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
6447 THD2650 (Vc) Voltage c THD2650 %
6449 THD2650 (Ia) Current a THD2650 %
6451 THD2650 (Ib) Current b THD2650 %
6453 THD2650 (Ic) Current c THD2650I %
6455 THD2650 (Vab) Voltage ab THD2650 %
6457 THD2650 (Vbc) Voltage bc THD2650 %
6459 THD2650 (Vca) Voltage ca THD2650 %
6461 K-Factor (Va) Voltage a K-Factor %
6463 K-Factor (Vb) Voltage b K-Factor %
6465 K-Factor (Vc) Voltage c K-Factor %
6467 K-Factor (Ia) Current a K-Factor %
6469 K-Factor (Ib) Current b K-Factor %
6471 K-Factor (Ic) Current c K-Factor %
6473 K-Factor (Vab) Voltage ab K-Factor %
6475 K-Factor (Vbc) Voltage bc K-Factor %
6477 K-Factor (Vca) Voltage ca K-Factor %
6479 TDD (Ia) Current a TDD %
6481 TDD (Ib) Current b TDD %
6483 TDD (Ic) Current c TDD %
Table 2-21 Registers 0201 to 0390, and 6401 to 6484: Measured Values (cont.)
Register Type of Information Remark Unit
SYS_SICAM_Q100_US.book Page 44 Thursday, September 24, 2020 1:17 PM