Siemens SIDOOR ATD430W - System Overview; System Configuration and Area of Application

System overview
3
3.1 System con󹪝guration and area of application
Overview of system con󹪝guration
The graphic uses an example of a machine protection door to illustrate the general
con󹪝guration of automatic door control with the SIDOOR system including additional
components, such as a power supply and drive.





$&9
① Optional additional units, e.g.
• SIDOOR SERVICE TOOL
• SIDOOR SOFTWARE KIT
• SIDOOR LINK and Android smartphone/tablet with the
SIDOOR SUPPORT app
⑤ Sliding door
② Controller ⑥ Power supply
③ Geared motor ⑦ SIMATIC S7-1500
④ Accessories: Door clutch holder, toothed belt, de󹪞ector unit
Figure 3-1 System con󹪝guration
System con󹪝guration with higher-level controller
Operation commands, parameter assignment, system status via 󹪝eld bus (PROFIBUS or
PROFINET) or terminal module and/or digital input signals possible.
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA 31