Siemens SIMATIC 505 - Editing and Documentation Features

Advanced Function Programming
3-15
SIMATIC 505–2556 Installation and Operation Guide
3.3 Loading Programs into the I/O Module
Before entering relay ladder logic in the controller , utilize the worksheets in
sections 3.8 and 3.9 to ensure a successful installation and start-up.
The following sample ladder program is provided to demonstrate how the
data is loaded into the SIMA TIC 505–2556 module. Each channel is enabled
for all functions supported.
This sample RLL loads the module with alarm, scaling, filtering, averaging,
and function enable bits. V200 manipulation is left to the programmer .
See