Siemens SIMATIC 505 - Page 65

Specifications
B-2
SIMATIC 505–2556 Installation and Operation Guide
Specifications (continued)
Table B–1 Physical and Envir onmental Specifications (continued)
Accuracy
T
ypes J, K, E, T , L
T ypes R,S
Millivolt
At a fixed ambient temperature between 0 _ C to
60_C and a reported temperature above 0 _ C for
types J, K, T , L, E or above 500 _ C for types R and S
±0.5_ C at 25 _
±1_ C from 0 _ C to 60 _C
0_ C to full scale
±1_ F at 25 _ C
±2_ F from 0 _ C to 60 _C
32_ F to full scale
Reduced accuracy for measurements below 0 _ C to
32_F
±1_ C at 25 _ C for measurement range 500-1768 _C
±2_
C from 0 _ C to 60 _C
±2_ F at 25 _C
±4_
F from 0 _ C to 60 _C
Reduced accuracy for measurements below 500 _C
± 50 µ V from 0 _ C to 60 _C
Common Rejection Mode >130 db @ 50/60 Hz
Normal Rejection Mode >180 db @ 60 Hz >80 db @ 50 Hz
Connector 48 position fixed, wire press in
W ire Gauge 18 to 30 A WG
Module Size Single W ide
Backplane Power Consumption 5 W atts
Isolation 1500 VDC channel-to-channel
1500 VDC channel-to-backplane
Operaing T emperature
0_ C to 60 _ C (32 _ F to 140 _F)
Storage T emperature
–40_ C to 85 _ C (–40 _ F to 185 _F)
Humidity , Relative 5% to 95% (non-condensing)
Agency Approvals UL, UL for Canada
FM (Class  , Div 2), CE
Shipping W eight 1.5 lbs. (0.68 kg)
Specifications subject to change without notice.