Siemens SIMATIC 6DL1131-6DF00-0PK0 - Page 8

Properties
The I/O module has the following technical properties:
● 8 digital inputs electrically isolated from the backplane bus and supply voltage L+/M groups
of 8
● Digital input with the following parameterizable properties
– Diagnostics
– Input delay
– Hardware interrupts for positive and negative edges
● Nominal input voltage range 24 to 125 V DC
● Module-specific configurable diagnostics for missing supply voltage L+
● Suitable for connecting switches and 2-/ 3-/4-wire sensors in accordance with IEC 61131,
type 1 and 3
The I/O module supports the following functions:
● Firmware update
● I&M identification data
● Parameter reassignment in RUN
● Value status
● Time stamping (accuracy 1 ms)
You can configure the I/O module with HW Config and integrate it into your system.
WARNING
Danger of electric current!
This may result in death or severe injury.
Electrical hazard arises with electric circuits operated with voltages >30 V
eff
and 42.4 V
peak
or
60 VDC.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color-coded labels
● Reference identification label
● Shield connector
Product overview
2.1 Properties of the I/O module DI 8x24…125VDC HA
Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)
8 Manual, 11/2017, A5E39288633-AB