To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC 6DL1193-6AR00-0AA0 and is the answer not in the manual?
General| Model | 6DL1193-6AR00-0AA0 |
|---|---|
| Potential terminals | Yes |
| Manufacturer | Siemens |
| Power supply | 24 V DC |
| Protection class | IP20 |
| Product designation | SIMATIC ET 200SP |
| Module capacity | 16 digital |
| Shield connection | Yes |
| Product type | Digital |
| Input type | Digital |
| Output type | Digital |
| Operating temperature | +60 °C |
| Connection method | Push-in |
Requirements for installing the distributed I/O system in an enclosure based on standards.
Warnings regarding enclosure, cables, and ambient temperature for safe operation.
Explains the use of BusAdapters for PROFINET IO and related network information.
Details which products this documentation applies to and where to find related info.
Information on insulation, protection class, degree of protection, and standards.
Explains how interface modules and BusAdapters connect to each other.
Provides information on selecting electrical or optical PROFINET IO cables for connection.
Examples of recommended and not recommended PROFINET IO system setups.
Introduces the BA 2xFC BusAdapter and its design features.
Details the procedure for stripping the jacket of a PROFINET connecting cable.
Step-by-step guide to connecting the PROFINET cable to the BusAdapter.
Instructions for mounting the BusAdapter onto the distributed I/O.
Introduces the BA 2xLC BusAdapter and its design.
Details connecting PROFINET IO using fiber-optic cables with the BA 2xLC.
Explains connecting the IO device to PROFINET IO via BA 2xRJ45 with Industrial Ethernet cables.
Details connecting PROFINET IO using RJ45 connectors with the BA 2xRJ45.
Explains connecting the IO device to PROFINET IO via the BA LC/FC.
Explains connecting the IO device to PROFINET IO via the BA LC/RJ45.
Explains connecting the IO device to PROFINET IO using a 2-wire system with copper wires.
Important note that removing/inserting the BusAdapter under voltage is prohibited.
Details scenarios of saving device names when exchanging components.
Explains that LED displays are status and error indicators for the BusAdapter.
Explains the function of the LK LED in visualizing Ethernet connection status.
Shows the pin assignment for the RJ45 connection plug.
Shows the pin assignment for the RJ45 connector for a 2-wire system.
Details the pin assignment of the FC outlet (4-pin connector).
Information on permissible climatic ambient conditions for the system.
Technical specifications for the SIMATIC BusAdapter BA 2xRJ45.
Technical specifications for the SIMATIC BusAdapter BA LC/RJ45.
Technical specifications for the SIMATIC BusAdapter BA 2xLC.
Technical specifications for the SIMATIC BusAdapter BA LC/FC.
Technical specifications for the SIMATIC BusAdapter BA 2xFC.
Provides contact information for repair service and manufacturer.
