Siemens SIMATIC 6DL1193-6AR00-0AA0 - BusAdapter BA 2 xLC

Result
The BusAdapter is mounted on the distributed I/O.
4.5 BusAdapter BA 2xLC
4.5.1 Basics of BusAdapter BA 2xLC
De󹪝nition
You connect the IO device to the PROFINET IO system via the BusAdapter BA 2×LC with 󹪝ber-
optic cables.
Note
If you use the BusAdapter BA 2xLC in a redundant con󹪝guration of an ET 200SP HA with two
interface modules, an additional reduction of the permissible ambient temperature must be
observed.
Description
The BusAdapter BA 2xLC is designed as follows:
Installation
4.5 BusAdapter BA 2xLC
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 21