4.4 BusAdapter BA 2xFC
4.4.1 Basics of BusAdapter BA 2xFC
Denition
You connect the IO device to the PROFINET IO system via the BusAdapter BA 2×FC with
FastConnect cables.
Description
The BusAdapter BA 2xFC is designed as follows:
① LED LK 1 - Status of the Ethernet connection port 1
② LED LK 2 - Status of the Ethernet connection port 2
③ Connection diagram for the PROFINET connectors (view from below)
④ Fixing screw
⑤ Tightening torque
Installation
4.4 BusAdapter BA 2xFC
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 15
To Next Page
Loading...
