Supplements to ET 200SP documentation
2.4 Interface module manuals
Product information on the documentation of the ET 200SP distributed I/O system
44 Product Information, 02/2021, A5E03799595-BG
Equipment Manual IM 155-6 DP HF, Edition 10/2018
Section 2.2.1 Requirements
Table 2- 3 Version dependencies of other module functions
Function Product
version of
the module
as of
Firmware
version of
the module
as of
Configura-
tion with
GSD
file/software
from a third-
party manu-
1
STEP 7 as of
V5.5 SP3
with
HSP0242
STEP 7 (TIA
Portal) as of
V13
Interface module; article
number: 6ES7155-
V15.1)
Systems of third-party manufacturers: Depending on the range of functions of the third-party
system
2
Configure the module as version 6ES7155-6BA00-0CN0 FW V3.1 (as of HSP0242 V3)
Compatibility with BusAdapter BA 2xM12
The following table shows the compatibility of the BusAdapter BA 2xM12 with the interface
modules:
Interface module BA 2xM12 is
supported
PROFINET GSD STEP 7 STEP 7
IM155-6 PN HS (6ES7155-6AU00-0DN0)
IM155-6 PN ST (6ES7155-6AU01-0BN0)
V16 or higher
with HSP205
IM155-6 PN HF (6ES7155-6AU00-0CN0)
higher with
HSP0250 V5.0
with HSP302
IM155-6 PN/2 PN HF (6ES7155-6AU01-0CN0)
IM155-6 PN/3 PN HF (6ES7155-6AU30-0CN0)
IM155-6 MF HF (6ES7155-6MU00-0CN0 )
higher with
HSP0250 V5.0
configured as
IM155-6 PN/2 PN
with HSP302
configured as
IM155-6 PN/2 PN
HF V4.2
To Next Page
Loading...
Need help?
General
