Siemens SIMATIC ET 200SP Product Information

Product information on the documentation of the ET 200SP distributed I/O system
Product Information, 02/2021, A5E03799595-BG
5
Module overview of ET 200SP
1
1.1 Possible combinations of BaseUnits and I/O modules
Contents
This product information includes amendments and corrections to the documentation of the
ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/109742709
).
Which I/O modules / motor starters fit on a BaseUnit?
The following table provides an overview of the I/O modules / motor starters that fit on the
corresponding compatible BaseUnits:
Table 1- 1 Possible combinations of BaseUnits and I/O modules
I/O module
BaseUnit BU15-
BaseUnit BU20-
Color-coded label
for process termi-
nals
BU type
A0
P16+A1
0+2D
P16+A0
+2D
P16+A1
0+2B
P16+A0
+2B
BU type
A1
P16+A0
+12D/T
P16+A0
+2D/T
P16+A0
+12B/T
P16+A0
+2B/T
BU
type
B0
P12+A4
+0B
BU
type B1
P12+A0
+4B
BU
type
C0
P6+A
2+4D
BU
type
C1
P6+A2
+4B
BU
type
D0
P12+A
0+0B
BU
type
F0
P8+A4+
0B
BU
type
U0
P16+A0
+2D
P16+A0
+2B
Digital I/O modules
DI 16x24VDC ST
✓
CC00
DI 8x24VDC ST
✓
CC01
DI 8x24VDC HF
✓
CC01
DI 8x24VDC HS
✓
CC01

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C