Siemens simatic hmi op7 User Manual

B-17
Equipment Manual OP7, OP17
Release 04/99
Remedy:CauseMes-
sage
731 Internal err or
T
ransfer parameter LEDST A TUS is incorrect in
RIO function “Change LED Status“
732 Internal err or
Key number can not be higher than 7/15/23
(8-key/16-key/24-key keyboard)
733 Internal err or
Key number must be less than 4 as a maximum of
4 keys is possible.
734 Internal err or
The module number must be 0.
735 Internal err or
Illegal RIO function.
The following are permissible: Read,
W rite (LEDs, outputs) and Initialize.
736 Internal err or
Keyboard driver error .
737 Internal err or
T
oo many keyboard assignment areas (mailboxes)
being transferred to PLC.
738 Internal err or
Mailbox type of received message is incorrect.
739 Internal err or
Key acknowledgement received when message
already acknowledged.
740 Internal err or
Message status not permitted for first alarm/event
message.
741 Internal err or
Buf
fer type dif ferent from event or alarm message
buffer.
742 Internal err or
Message type dif ferent from event or alarm mes -
sage buf fer.
743 Internal err or
Configuration message error
744 Internal err or
Incorrect mailbox type received.
746 Internal err or
Actual control value and process link are identical
on a screen.
In COM TEXT : change address

Siemens simatic hmi op7 Specifications

General

Brand	Siemens
Model	simatic hmi op7
Category	Control Panel
Language	English