8-9
Equipment
Manual OP7, OP17
Release 04/99
Proceed
as follows to transfer a data record.
Step Procedure
1
Select the standard screen
Recor
d
!
T
ransfer.
2
Select the recipe in the recipe directory
3
Position the cursor on the
Source
field in the transfer screen.
Depending on the direction of transfer desired, enter the
appropriate source number (see examples), and confirm.
4
Position the cursor on the
Destination
field.
Depending on the direction of transfer desired, enter the
appropriate destination number (see examples), and confirm.
5
Position the cursor on the
Accept
field, and confirm transfer
.
During the data transfer
, an asterisk (”*”) is indicated in the
acceptance field.
6
Exit the standard screen with
ESC
Using
the transfer
screen
To Next Page
Loading...
Need help?
General
