EasyManuals Logo

Siemens SIMATIC IPC427D Operating Manual

Siemens SIMATIC IPC427D
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
BIOS Setup (SCU)
3.4 Advanced menu
BIOS Description
22 Operating Manual, 05/2016, A5E33664825-AB
"Video Configuration" submenu
Parameter
Meaning
Primary Display
1 2
Selection of the video interface for the boot messages during the self-test.
The following values are dependent on the existing hardware.
Auto An installed graphics card is automatically detected.
Messages are then output to the graphics card.
If no graphics card is installed, the messages are
sent to the internal onboard graphics (IGFX).
IGFX
IGD
Messages are output only to the internal onboard
graphics (IGFX) or "Internal Intel Graphic" (IGD).
PEG If a PEG graphics card is installed, messages are
output to the PEG graphics card.
If not installed, to
the integrated onboard graphics (IGFX).
PCI(e) If a PCI(e) graphics card is installed, message are
output to the PCI(e) graphics card.
If not installed, to
the integrated onboard graphics (IGFX).
IGD Boot Type
Refer to submenu "Internal Graphic Device".
"Internal Graphic Device" submenu
IGD - Aperture Size
1
128 MB, 256 MB,
512 MB
Maximum size of the main memory area that is
reserved for the graphics and that the operating
system can use as video memory.

Other manuals for Siemens SIMATIC IPC427D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC IPC427D and is the answer not in the manual?

Siemens SIMATIC IPC427D Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC IPC427D
CategoryIndustrial PC
LanguageEnglish

Related product manuals