To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC IPC477E PRO and is the answer not in the manual?
General| RAM | Up to 16 GB DDR3L |
|---|---|
| Power Supply | 24 V DC |
| Operating Temperature | 0 °C to 50 °C |
| Processor | Intel Core i3/i5/i7 |
| Storage | SSD or HDD options available |
| Operating System | Windows 10 IoT Enterprise |
| Display Size | 15, 19, or 22 inches |
| Display Resolution | 1366 x 768 (15.6") or 1280 x 1024 (19") |
| Touchscreen | Yes, projected capacitive touchscreen |
| Connectivity | Ethernet, USB |
| Mounting | Panel mounting |
| Protection Class | IP65 (front) |
| Dimensions (W x H x D) | Varies by model |
| Weight | Varies by model |
Details the features and design of the SIMATIC IPC477E PRO.
Describes the physical installation and components of the HMI device.
Provides critical safety warnings and precautions for device operation.
Guidance on proper device operation and environmental considerations.
Outlines checks and procedures before installing the device.
Instructions for physically attaching the HMI device.
Details on connecting power, protective conductor, and data cables.
Important considerations before and during device setup.
Step-by-step guide for the first-time setup of the device.
Steps to upgrade or replace the RAM module.
Guide for managing the CFast storage card.
Recommends preventative replacement intervals for wear-prone components.
General guidelines and safety precautions for performing repairs.
Steps for reinstalling the operating system and software.
Lists common issues and their potential causes and remedies.
