Maintaining and repairing the device
8.5 Installing the software
SIMATIC IPC477E PRO
100 Operating Instructions, 08/2017, A5E39912462-AA
Procedure - Increase partition
Note
To increase a partition, this partition must not be formatted with a file system or the partition
must be formatted with an "NTFS" file system.
1. Click in the partition manager with the right mouse button on the partition to be increased
and click on "Increase size".
2. Follow the instructions on the screen.
Additional information is available in the "Help" menu under "Help topics" and "Search".
Installing drivers and software
Note
Set country settings to English (US)
In the case of
multilingual operating systems (MUI versions), you must set the menus and
dialogs and the default language to English (US) in the regional settings before new drivers
and operating system updates are installed.
You can install a second language package for
service purposes at a later time with the
supplied USB flash drive under Windows Embedded Standard 7.
1. Connect the supplied USB flash drive to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the desired driver
6. Open the folder with the driver information: Click on the link next to "Driver path".
7. Start the setup program in this folder.
Note
For a new installation of Windows operating systems, the chipset d
river must be installed
before all other drivers, if required.
To Next Page
Loading...
Need help?
General
