Siemens SIMATIC IPC477E PRO - System components

Overview
2.5 System components
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
15
2.5
System components
2.5.1
Base adapter
PRO devices of the type "suitable for support arm" or "suitable for stand" can be mounted on
a support arm or stand using the base adapter. Depending on the support arm system used,
an adapter plate may have to be installed in addition (see Accessories (Page 14)).
A base adapter is included with the corresponding PRO devices. The base adapter can also
be ordered separately.
①
Seal
②
Cable channel
③
Mechanical interface to the PRO device
④
Cover
⑤
Mechanical interface to support arm or stand
Article number for the base adapter as accessory: 6AV7674-1KA00-0AA0.
See also
Prepared for support arm or stand without extension elements (flange on top) (Page 35)
Industry Mall (https://mall.industry.siemens.com)
Expansion components and accessories (http://www.automation.siemens.com/mcms/pc-
based-automation/en/industrial-pc/expansion_components_accessories)