Siemens SIMATIC IPC477E PRO - Power Supply; Opening and Closing the Terminal Compartment Cover

Mounting and connecting the HMI device
4.4 Connecting the device
SIMATIC IPC477E PRO
44 Operating Instructions, 08/2017, A5E39912462-AA
4.4.2
Power supply
4.4.2.1
Opening and closing the terminal compartment cover
Requirements
● The device is disconnected from the power supply.
● Torx TX20 screwdriver
Opening the terminal compartment cover
Opening the terminal compartment cover for pedestal and support arm device versions
without extension components.