To Next PageTo Next PageWhat to do if Siemens Touch Panel external monitor remains dark?
If the external monitor remains dark, first ensure the monitor is switched on and not in power save mode (press any key). Then, increase the screen brightness. Also, check that the power cord and monitor cable are properly connected to both the monitor and the system unit or grounded outlet. If the issue persists, contact your technical support team.
What to do if Siemens Touch Panel device is not operational?
If the Siemens Touch Panel device is not operational, check the power supply, network cable, and power plug. Ensure the On/Off switch is in the correct position. Also, verify the device is being operated within specified ambient conditions. If transported in cold weather, wait approximately 12 hours before switching it on.
General| Type | Industrial PC |
|---|---|
| Graphics | Intel HD Graphics |
| Connectivity | Ethernet, USB, Serial |
| Power Supply | 24 VDC |
| Processor | Intel Core i7 |
| Storage | HDD/SSD |
| Operating System | Windows 10 IoT Enterprise |
| Expansion Slots | PCI, PCIe |
| Protection Class | IP20 |
| Operating Temperature | 0 to 50 °C |
