Siemens SIMATIC IPC677D - Security Menu

BIOS Setup (SCU)
3.5 Security menu
BIOS Description
Operating Manual, 05/2016, A5E33664825-AB
29
3.5
Security menu
The "Security" menu lets you block access to your device using passwords. The following
figure shows an example for the "Security" menu.
Parameter
Meaning
TPM Status
1
Disabled and Inactive Trusted Platform Modul (TPM) is
disabled and inactive but can be enabled.
Enabled and Active Trusted Platform Module is enabled and
active but can be disabled.
TPM Operation
1
Enables Trusted Platform Module (TPM).
No Operation Trusted Platform Module (TPM) is not in
operation.
Disable and Deactivate Trusted Platform Module is not available
(disabled). Option resets automatically to
"No Operation".
Enable and Activate Trusted Platform Module is available and
enabled.
The following Setup parameter is visible if "TPM Operation" is set to "Enable and Activate".
• TPM Force Clear
1
Deletes the initialization of the TPM block.
Supervisor Password
The general password is set (Installed) or not set (Not Installed).
User Password
The user password is set (Installed) or not set (Not Installed).