Siemens SIMATIC IPC677D - 3 BIOS Setup (SCU); Starting BIOS Setup; Structure of the BIOS Setup Menu

BIOS Description
Operating Manual, 05/2016, A5E33664825-AB
11
BIOS Setup (SCU)
3
3.1
Starting BIOS Setup
1. Open the BIOS selection setup.
2. Click the "SCU" button.
3.2
Structure of the BIOS Setup menu
The individual setup parameters are distributed between different menus and submenus. Not
all menus are included in each supplied device configuration. The following table shows the
menus.
Menu
Meaning
Main Display system information, for example, BIOS version, processor and memory
Advanced
Configure hardware using different submenus
Security
Security functions, e.g., setting a password
Power
Specify power management of CPU and the device
Boot
Determine boot options, e.g., boot order
Exit
Save and exit (see Exit menu)
The menus always have the same structure. The figure below shows an example for the
"Main" menu. Device-specific information is shown blurred.