Safety instructions and approvals
2.3 Standards, certificates and approvals
MP 377 15" Touch daylight readable (WinCC flexible)
18 Operating Instructions (Compact), 04/2009, A5E02532357-01
Tick mark for Australia
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
IEC 61131
The HMI device meets the requirements and criteria conforming to IEC 61131-2,
Programmable Logic Controllers, Part 2, equipment requirements and testing.
Requesting certificates
Copies of the certificates and reports can be requested from the following address:
Siemens AG
Industry Sector
I IA AS R&D ST
PO Box 1963
92209 Amberg
Germany
Certificates are also available at the following Internet address:
"
http://support.automation.siemens.com"
Select "Product Support".
To Next Page
Loading...
