Siemens SIMATIC NET SCALANCE SC636-2C User Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
173
4.4.9.5 SNMPv3 Views
Configuration of SNMPv3 views
You configure the parameters of SNMP views on this WBM page.
Note
Controlling the SNMPv1 and
SNMPv2c access
The preconfigured
SIMATICNETRD and SIMATICNETWR views are used internally to
control the SNMPv1 and SNMPv2c access. If you delete or change these views, this
directly affects the SNMPv1 and SNMPv2c access.
Description
The page contains the following boxes:
• View Name
Select the name of the view that you want to configure. An SNMPv3 view always
needs to be assigned to an SNMPv3 access. For this reason, you need to enter a new
SNMPv3 view in the table in the "SNMP Access" tab.

Siemens SIMATIC NET SCALANCE SC636-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC636-2C
Category	Switch
Language	English