Configuring with Web Based Management
4.7 "Security" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
325
• IKEv2 DPD retries
Specify the number of allowed failed attempts after which the IKEv2 connection is
considered disrupted. The setting applies to all IKEv2 connections.
• IKEv2 DPD Retry Interval[s]
Specify the interval at which the failed attempts are sent.
4.7.6.2 Remote End
On this WBM page, you configure the partner (VPN end point).
Description
The page contains the following:
• Remote End Name
Enter the name of the remote station and click "Create" to create a new remote
station.
The table contains the following columns:
• Select
Select the check box in the row to be deleted.
• Name
Shows the name of the partner.
• Remote Mode
Specify the role the remote stations will adopt.
– Roadwarrior
The reachable remote addresses are entered. The reachable remote subnets are
learned from the partner.
– Standard
The reachable remote address and the reachable remote subnets are entered
permanently.
To Next Page
Loading...
Need help?
General