Description of the device
4.6 LED display
SCALANCE WxM766
Operating Instructions, 03/2022, C79000-G8976-C617-03
31
Power supply L1 is applied.
Power supply L2 is applied.
The device is not supplied using PoE.
The device is supplied using PoE.
Note: If the device is simultaneously connected to 24V voltage
(L1/L2), the power supply to the device is via L1/L2.
There is no connection over the Ethernet interface P1.
There is a connection over the Ethernet interface P1 (link).
yellow
Data transfer over the Ethernet interface P1.
The WLAN interface 1 is deactivated.
The WLAN interface 1 is initialized and ready for operation.
Client mode:
There is a connection over the WLAN interface 1.
yellow
Data transfer over the WLAN interface 1.
The client is searching for a connection to an access point.
Interval:
100 ms on / 100 ms
With DFS (802.11h), the channel is scanned for one minute for
competing radar signals before the channel can be used for data
traffic.
The functionality of this LED will be configurable for different
applications. It is disabled by default.
To Next Page
Loading...
Need help?
General
