You will nd the EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/15312/
cert).
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
DE-76181 Karlsruhe
Germany
ATEX (explosion protection directive)
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area".
You will nd this document
• on the data medium that ships with some devices.
• on the Internet pages of Siemens Industry Online Support (https://
support.industry.siemens.com/cs/ww/en/view/78381013).
Enter the document identication number C234 as the search term.
The SIMATIC NET products described in these operating instructions meet the requirements of
the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially Explosive
Atmospheres".
Note
Type of protection of the device
The devices are approved for various types of protection. You can nd the type of protection of
your device and the ATEX certicate number on the nameplate.
Permitted types of protection
Approvals
SCALANCE XM-400
82 Operating Instructions, 03/2021, C79000-G8976-C306-10
To Next Page
Loading...
Need help?
General