Siemens SIMATIC OP7 User Manual

23
To set segment 2 (% RH)
Humidity 60%
Duration 1h - Maintenance
To set segment 2 (°C)
Temperature 30°C
Duration 1h - Maintenance
hh : mm : ss
Durat. 1 : 0 : 0
Wait duration : ON
C1
Channel 1
Control : ON
Wait set point : OFF
Max speed :OFF
Set point : 30.00 °C
Grad. : 0.00 °C/min
Near set : 1,00 °C
C2
C3
Channel 2
Control : ON
Wait set point : OFF
Max speed :OFF
C4
C5
Because the same temperature value
is maintained
20
40
30
1 1,5 2,52
1
OP2605-050
40
60
80
90
OP2605-060
Because the same temperature value
is maintained
Set point : 60.00 RH %
Grad. : 0.00 RH %/min
Near set : 3.00 RH %
2
2
C6
to save the programmed segment
SHIFT
ENTER
Save segment : SAVE
C7
EDIT PROGRAM
< ESC > Prev. menu
Segment N. 3
Wait for this number to appear
• Press
repeatedly
This page is visualized
Save segment : OFF
Total segment : 0
Confirm progr : OFF
When this page is visualized, if the previ-
ously described operations have been
carried out, the segment has been saved
and therefore must not be saved again.
Move on to the next step.
WARNING!
If you have accidentally saved the same segment twice, correct the number on this page.

Siemens SIMATIC OP7 Specifications

General

Brand	Siemens
Model	SIMATIC OP7
Category	Control Systems
Language	English