Siemens SIMATIC OP7 User Manual

24
60
80
100
UR
%
95
90
To set segment 3 (% RH)
Humidity from 60% to 95%
Duration 2h -slope-gradient 0.29 RH%/min
To set segment 3 (°C)
Temperature 30°C
Duration 2h - Maintenance
hh : mm : ss
Durat. 2 : 0 : 0
Wait duration : ON
D1
Channel 1
Control : ON
Wait set point : OFF
Max speed : OFF
Set point : 30.00 °C
Grad. : 0.00 °C/min
Near set : 1,00 °C
D2
D3
Channel 2
Control : ON
Wait set point : OFF
Max speed : OFF
D4
D5
Because the same temperature value
is maintained
20
40
30
1 1,5 2,52
1
OP2605-050
OP2605-065
Because the same temperature value
is maintained
Set point : 95.00 RH %
Grad. : 0.29 RH %/min
Near set : 3,00 RH %
D7
to save the programmed segment
Save segment : SAVE
D8
EDIT PROGRAM
< ESC > Prev. menu
Segment N. 4
Wait for this number to appear.
3
3
Water recharge: OFF
Not used: OFF
Not used: OFF
SP. hum. CTRL. OFF
D6
• Press
repeatedly
SHIFT
ENTER
This page is visualized
Save segment : OFF
Total segment : 0
Confirm progr : OFF
When this page is visualized, if the previ-
ously described operations have been
carried out, the segment has been saved
and therefore must not be saved again.
Move on to the next step.
WARNING!
If you have accidentally saved the same segment twice, correct the number on this page.
Wait for this word to appear

Siemens SIMATIC OP7 Specifications

General

Brand	Siemens
Model	SIMATIC OP7
Category	Control Systems
Language	English