32
To set segment
11 (°C)
Temperature 110°C
Maximum speeDuration 1.5h - Maintenance
hh : mm : ss
Durat. 1 : 30 : 0
Wait duration : ON
N1
Channel 1
Control : ON
Wait set point : ON
Max speed : OFF
Set point :110.00 °C
Grad. : 0.00 °C/min
Near set : 1,00 °C
N2
N3
because it is being maintained
OP2605-140
to save the programmed segment
Save segment : SAVE
To set segment
11 (% RH)
Humidity - - - - not controlled
11
Leave everything switched
OFF as humidity is not con-
trolled in this temperature
range
SHIFT
ENTER
This page is visualized
Save segment : OFF
Total segment : 11
Confirm progr : OK
When this page is visualized, if the previ-
ously described operations have been
carried out, the segment has been saved
and therefore must not be saved again.
Move on to the next step.
SHIFT
• digit the number of segments
(11) and then press ENTER.
Cycles Menu
It automatically moves on to this
page
ENTER
To Next Page
Loading...
