2
2-4
Programming Device PG 740
C79000-G7076-C742-01
If you do not have a desk or table on which to mount the unit, you can work
with it standing on the floor. You can swing the casing with display through
about 90° into the horizontal plane.
Stand
Pivot
Extra pull-out support
Figure 2-3 Horizontal Operating Position without Keyboard
You can remove the keyboard if you are operating the unit in the position
shown in Fig. 2-3.
Press down on the locks in
the middle of the hinge
assembly
Figure 2-4 Detaching the Keyboard
!
Caution
If the keyboard is detached, there is a risk of the unit falling over. Pull out
the extra support.
Horizontal
Mounting
Detaching the
Keyboard
Installing the PG 740
To Next Page
Loading...
