Getting started
Easy Book
Manual, 05/2009, A5E02486774-01
23
STEP 7 Basic displays both the tag table and
the device editor together.
Zoom the CPU (over 200%) to make the I/O
points legible and selectable.
1. Select I0.0 and drag it to the first row of the
tag table.
2. Change the tag name from "I0.0" to "Start".
3. Drag I0.1 to the tag table and change the
name to "Stop".
4. Drag Q0.0 (on the bottom of the CPU) to the
tag table and change the name to
"Running".
With the tags entered into the tag table, the
tags are available to your user program.
To Next Page
Loading...
