Easy Book
Manual, 05/2009, A5E02486774-01
89
Online functionality
8
8.1 Downloading a permanent IP address to an online CPU
① Networks available on the programming
device
To permanently assign an IP
address, you must configure the IP
address in the Device configuration,
save the configuration, and download
it to the CPU.
An IP address that has been
downloaded as part of the device
configuration will not be lost on a
power cycle of the PLC.
Use "Online access" to display the IP
address for the CPU.
Note that "Online access" displays all
of configured networks for the
programming device. Select the
correct network to display the IP
address for the specific CPU.
② IP address of the CPU on the network
Select "Download to device" and
"Extended download to device"
to display the devices on the
network.
Select "Show all accessible
devices" to display all accessible
devices with their assigned MAC
and IP addresses,.
To Next Page
Loading...
