Siemens SIMATIC S7-1500R/H

Technical specifications
6
The following table shows the technical specifications as of 11/2022. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7517-3HP00-0AB0/td?dl=en).
Article number 6ES7517-3HP00-0AB0
General information 
Product type designation CPU 1517H-3 PN
HW functional status FS06
Firmware version V3.0
Product function 
•
I&M data Yes; I&M0 to I&M3
•
Isochronous mode No
Engineering with 
•
STEP 7 TIA Portal configurable/integrated
from version
V18 (FW V3.0) / V15.1 (FW V2.6) or higher
Display 
Screen diagonal [cm] 6.1cm
Control elements 
Number of keys 6
Mode selector switch 1
Supply voltage 
Rated value (DC) 24V
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
Reverse polarity protection Yes
Mains buffering 
•
Mains/voltage failure stored energy time 5ms
•
Repeat rate, min. 1/s
Input current 
Current consumption (rated value) 1.5A
Current consumption, max. 1.9A
Inrush current, max. 1.9A; Rated value
I²t 0.4A²·s
Power loss 
Power loss, typ. 24W
Memory 
Number of slots for SIMATIC memory card 1
SIMATIC memory card required Yes
35
CPU1517H-3PN (6ES7517-3HP00-0AB0)
Equipment Manual, 11/2022, A5E42011886-AD