Siemens SIMATIC S7-300 Module data Equipment Manual

References
On installing and commissioning the CP
CP 343-1 Lean
76 Equipment Manual, 01/2023, C79000−G8976−C198−09
/10/
SIMATIC NET
Program blocks for SIMATIC NET S7 CPs
Programming Manual
Siemens AG
Link: (https://support.industry.siemens.com/cs/ww/en/view/62543517)
/11/
Automatisieren mit STEP 7 in AWL und SCL (ISBN: 978-3-89578-280-0) /
Automating with STEP 7 in STL and SCL (ISBN: 978-3-89578-295-4)
User manual, programming manual
Berger, Hans
Publicis KommunikationsAgentur GmbH, GWA, 2006
On installing and commissioning the CP
/12/
SIMATIC S7
S7-300 Automation System
Siemens AG
• CPU 31xC and 31x Installation: Operating instructions
Link: (https://support.industry.siemens.com/cs/ww/en/view/13008499)
• Module Data: Reference manual
Link: (https://support.industry.siemens.com/cs/ww/en/view/8859629)
For application and configuration of PROFINET IO
/13/
SIMATIC
PROFINET System Description
System manual
Siemens AG
(SIMATIC NET Manual Collection)
On the Internet under following entry ID:
Link: (http://support.automation.siemens.com/WW/view/en/19292127)

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)