Siemens SIMATIC S7 Operating Instructions

SIEMENS AG PRODAVE S7
Toolbox for Data Link PGs/PCs to SIMATIC S7
7
3. Operation
3.1 Installation of PRODAVE S7
3.1.1 Installation of PRODAVE S7 under Windows 95/98/NT/ME/2000
The installation of PRODAVE S7 is carried out via a Windows installation
program (SETUP.EXE), which must be activated by the file manager under
Windows.
After starting SETUP.EXE a destination path is offered for the installation which
may be changed by new input or via BROWSE.
After specifying the destination path the following installation components are
offered:
• PRODAVE S7 for Windows 95/98/NT/ME/2000
PRODAVE DLL and demonstration program for Windows
95/98/NT/ME/2000.
STEP7 Driver for Windows 95/98/NT/ME/2000
• Documentation, Online Help.
Setup automatically generates a PRODAVE program group with a
demonstration program and STEP7 tool to set up the used interface under
Windows 95/98/ME/NR/2000.
The drivers to be used can be loaded, parameterised and linked into the
system by means of the STEP7 tool PG/PC-interface parameterisation
(S7EPATSX.EXE). After correct installation the drivers are automatically
activated every time Windows 95/98/NT/ME/2000 is started.

Siemens SIMATIC S7 Specifications

General

Brand	Siemens
Model	SIMATIC S7
Category	Controller
Language	English