SIEMENS AG PRODAVE S7
Toolbox for Data Link PGs/PCs to SIMATIC S7
70
5. Demonstration Programs
5.1 Demonstration Programs for the PC
After successful installation demonstration programs for the PC can be found
under the path
• \SIEMENS\PRODAVE_S7\SAMPLE for PRODAVE S7
• \SIEMENS\PRODAVE_S7_MINI\SAMPLE for PRODAVE S7 mini
In accordance with these program examples we show in a clearly visible format
how the PRODAVE functions can be used. To ensure that the examples are
not overloaded we have realised only a few of the functions.
It is important to note that the two programs do not profess to be
complete. They merely serve to provide assistance when programming
your application.
The demonstration programs operate on the principle that process data traffic
to a PLC is based on Address = 2 and Slot no = 2!
When connecting an S7-400 with double wide power supply module set Slot no
= 3.
To Next Page
Loading...
