Siemens SIMATIC S7 Operating Instructions

SIEMENS AG PRODAVE S7
Toolbox for Data Link PGs/PCs to SIMATIC S7
72
6. Appendix
6.1 Error Texts
You may add your own error texts in the ERROR.DAT file to the ones listed
below. See function "error_message".
Error Messages:
0000 : ** ERROR.DAT = error text file for PRODAVE S7 **
00CA : no resources available
00CB : configuration error
00CD : illegal call
00CE : module not found
00CF : driver not loaded
00D0 : hardware fault
00D1 : software fault
00D2 : memory fault
00D7 : no message
00D8 : storage fault
00DB : internal timeout
00E1 : too many channels open
00E2 : internal fault
00E7 : hardware fault
00E9 : sin_serv.exe not started
00EA : protected
00F0 : scp db file does not exist
00F1 : no global dos storage available
00F2 : error during transmission
00F2 : error during reception
00F4 : device does not exist
00F5 : incorrect sub system
00F6 : unknown code
00F7 : buffer too small
00F8 : buffer too small
00F9 : incorrect protocol
00FB : reception error
00FC : licence error

Siemens SIMATIC S7 Specifications

General

Brand	Siemens
Model	SIMATIC S7
Category	Controller
Language	English