SIEMENS AG PRODAVE S7
Toolbox for Data Link PGs/PCs to SIMATIC S7
73
0101 : connection not established / parameterised
010A : negative acknowledgement received / timeout error
010C : data does not exist or disabled
012A : system storage no longer available
012E : incorrect parameter
0132 : no memory in DPRAM
0201 : incorrect interface specified
0202 : maximum amount of interfaces exceeded
0203 : PRODAVE already initialised
0204 : wrong parameter list
0205 : PRODAVE not initialised
0206 : handle cannot be set
0207 : data segment cannot be disabled
0300 : initialisiation error
0301 : initialisiation error
0302 : block too small, DW does not exist
0303 : block limit exceeded, correct amount
0310 : no HW found
0311 : HW defective
0312 : incorrect config param
0313 : incorrect baud rate / interrupt vector
0314 : HSA parameterised incorrectly
0315 : MPI address error
0316 : HW device already allocated
0317 : interrupt not available
0318 : interrupt occupied
0319 : sap not occupied
031A : no remote station found
031B : internal error
031C : system error
031D : error buffer size
0320 : hardware fault
0321 : DLL function error
0330 : version conflict
0331 : error com config
0332 : hardware fault
0333 : com not configured
0334 : com not available
0335 : serial drv in use
0336 : no connection
0337 : job rejected
0380 : internal error
0381 : hardware fault
0382 : no driver or device found
0384 : no driver or device found
To Next Page
Loading...
