Siemens SIMATIC TP700 Comfort Outdoor - Notes About Usage

Safety instructions
2.2 Notes about usage
TP700 Comfort Outdoor, TP1500 Comfort Outdoor
Compact Operating Instructions, 05/2016, A5E35956909-AC
13
2.2
Notes about usage
Industrial applications
The HMI device is designed for outdoor areas in industrial applications. It conforms to the
following standards:
● Requirements of the emission standard for industrial environments,
EN 61000-6-4: 2007 + A1:2011
● ESD immunity requirements to DIN EN 61000-6-2:2005
Use in residential areas
Note
The HMI device is not intended for use in residential areas. Operation of an HMI device in
residential areas can have a negative influence on
radio/TV reception.
If the HMI device is used in a residential area, you must take measures to achieve
Limit Class B conforming to EN 55011 for RF interference.
Individual acceptance is required.
Use with additional measures
The HMI device should not be used at the following locations unless additional measures are
taken:
● In locations with a high degree of ionizing radiation
● In locations with severe operating conditions, for example, due to:
– Corrosive vapors, gases, oils or chemicals
– Electrical or magnetic fields of high intensity
● In systems that require special monitoring, for example, in:
– Elevators
– Systems in especially hazardous rooms