5.3.9 Axial and radial forces
You can obtain the permissible values for axial and radial forces by contacting the Service
Center (Page 153) or referring to the machine catalog.
WARNING
Damage to bearings or the shaft
Large output masses and their centers of gravity outside the shaft extensions can lead to
resonance in operation. This can result in damage to the bearings and shaft. In an explosive
atmosphere, there is a risk of explosion. Death, serious injury, or material damage can result.
● Ensure that the permissible loads for the forces on the shaft extension are adhered to in
accordance with the catalog data or configuration data.
Assembly
5.3 Lift the machine to where it will be mounted and position it
1MB5 SH 400/450
56 Operating Instructions, 05/2019, A5E45959221A
To Next Page