EasyManua.ls Logo

Siemens SIMOTICS XP1MB5 Series - Route the Cable with an Appropriate Loop so that Water Can Drip off; Terminal Box

Siemens SIMOTICS XP1MB5 Series
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6-1 Connection technology (with cable lug / connection without cable lug)
Terminal box Connection
TB3R61
With cable lug (Page 77)
Without cable lug (Page 79)
1XB1631
1XB7750
6.3 Route the cable with an appropriate loop so that water can drip off
● In case of high humidity or when installed outside, water drops can move along the cable
jacket and enter the motor through the cable entry and cable gland.
If you route the cable with an appropriate loop then water doesn't enter the terminal box, but
simply drips off.
;
;
Figure 6-1 Water drip loop
6.4 Terminal box
Depending on the version, different terminal boxes may be installed on the machine.
Depending on the terminal box, different cable entries and options for the cable connection are
possible. You can identify the terminal box installed on the machine based on the graphics in
the following chapters.
Electrical connection
6.4 Terminal box
1MB5 SH 400/450
Operating Instructions, 05/2019, A5E45959221A 65

Table of Contents