Siemens SIMOTION CBE30-2 - Creating a Project and Configuring the Communication; Creating a SIMOTION Project and Inserting a D4 X5-2

6.2 Creating a project and configuring the communication
6.2.1
Creating a SIMOTION project and inserting a D4x5-2
Procedure
Proceed as follows to create a new project in SIMOTION SCOUT and insert a
SIMOTION D4x5‑2:
1. Select the Project > New... menu command.
2. In the "New Project" dialog box, assign a name and confirm with "OK."
A new folder with the name of the project will be created in the project navigator.
Parameter assignment / addressing
6.2 Creating a project and configuring the communication
SIMOTION D4x5-2
124 Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B