Climatic ambient conditions
SIMOTION D410 may not be used under the following climatic ambient conditions:
Note
Observe the application ranges of the PM340 power modules along with their derating. For
further information, see SINAMICS documentation.
Table 7-18 Climatic ambient conditions
Ambient conditions Application range Remarks
Permissible ambient
temperature for operation
0 to +55 °C Oil mist, ice formation, moisture condensation,
dripping water, spraying water, splashing water
and
water jets are not permitted (EN 60204, Part
1)
Maximum installation
altitude
2000 m to max. 5000 m above sea level From an altitude of 2000 m, the maximum
ambient temperature decreases by 7°C every
1000 m.
Relative humidity 5 to 95 % Without condensation, corresponds to a relative
humidity (RH) severity level 2 according to
IEC 1131‑2
Air pressure 795 to 1080 hPa -
Pollution degree 2 acc. to EN 60664-1 -
Pollutant concentrations Substances:
SO
2
: <0.5 ppm;
Relative humidity <60 %, no condensation
H
2
S: <0.1 ppm;
Relative humidity <60 %, no condensation
Test:
10 ppm 4 days
1 ppm; 4 days
Technical data
7.8 Mechanical and climatic ambient conditions
SIMOTION D410
94 Manual, 04/2014
To Next Page
Loading...
Need help?
General
